Transportation Engineering
Penetrometer (Manual & Automatic)
As per IS :1203,To determine the consistency of a Bituminous sample under fixed load, time and temperature conditions.
Ductility testing machine
As per IS : 1208,To determine the ductility of bituminous materials in a briquette mould by measuring the breaking elongation at a constant speed of 50 mm/min.
Ring & Ball Apparatus
As per IS :1205,The Ring and Ball Apparatus is used for determining the softening point of bituminous materials
Absolute Kinematic Viscosity bath
As per IS: 1206 (Part II and III).Determination of Absolute and kinematic Viscosity of Bitumen.Viscosity bath is built with Digital stop watch, Vacuum Pump - capable to maintain vacuum of 300 mm/Hg, Vacuum Manning Viscometer No.12 and 13, Reverse flow Viscometer No.6, Silicon oil, silicon tubes and calibration certificate for Viscosity bath, certificate of constant for Viscometers.
Sieves & Sieve Shaker machine
Used for measurement of particle sizes
.jpg)
CBR apparatus
As per IS: 2720 PART-16.Evaluting strength of sugrade soil and other pavement materials.
Thickness & Length gauge
As per IS: 2386 (Part - I).Shape of aggregates particles determined by percentage of flaky and elongated particles contained in it.
Buoyancy Balance
Buoyancy Balance helps in determining the specific gravity and water absorption of the aggregate.
MERLIN
MERLIN (Machine for Evaluating Roughness using Low-cost Instrumentation) is a simple, low-cost device designed for measuring road roughness,
Dynamic Cone Penetrometer
This portable hand operated equipment is designed to obtain a direct and rapid in-situ evaluation of the structural strength of road pavement layers constructed with unbound materials.
Pycnometer
As per IS: 2386 (Part 3).The Pycnometer Bottle is used to determine specific gravity of clay, sand, gravel of size finer than 6.3mm.
Impact Testing Machine
As per IS: 2386 (Part - IV).Machine is used for determining the aggregate impact value of coarse aggregate, which is an indicator of their toughness and resistance to sudden impact.
Flash and Fire point apparatus
As per IS :1209,The Pensky Martens Flash Point Apparatus is designed to determine the flash point of bituminous materials.
Lidar Speed Gun
A LIDAR (Light Detection and Ranging) speed gun, or laser speed gun, is a device that uses pulsed laser light instead of radar to measure the speed of vehicles, typically for traffic enforcement.
Radar Speed Gun
The radar unit functions by emitting radio waves that bounce off vehicles, allowing for precise detection of their speed.
Vision Screener
Vision screener refers to a tool or test used to assess a driver's visual acuity and other visual functions
Perimeter apparatus
Perimeter is used to measure the peripheral field of vision
HD Video cameras
Real-time traffic monitoring, incident detection, traffic flow analysis, and enforcing traffic laws,capture images and videos of vehicles,Counting vehicles and pedestrians.
PTV Vissim (Traffic Simulation)
The world's leading traffic simulation software PTV Vissim digitally reproduces the traffic patterns of all road users on a microscopic scale
Driving Simulator
A driving simulator is a sophisticated system designed to replicate real-world driving scenarios within a controlled, virtual environment.
Instrumented Vehicle
An instrumented vehicle equipped with Advanced Driver-Assistance Systems (ADAS) is a state-of-the-art platform designed to enhance road safety and driver behavior analysis.It integrates a range of sensors, cameras, and data acquisition systems to capture real-time information on vehicle dynamics, driver inputs, and environmental conditions
Performance box
Performance Box is a GPS based performance meter that allows to measure G-forces, speed, lap and split times, 0-60, 0-100, braking distance and many more.
Pupil Invisible Eye Tracker
The Pupil Invisible eye tracker is a wearable eye-tracking device designed to capture natural eye movements in real-world scenarios.
DJI MAVIC 3 Classic DRONE
The DJI Mavic 3 Classic is a high-performance drone designed for professional-grade aerial photography and videography.
Virtual Reality (VR) 3D Simulator
VR 3D Simulator provides an immersive, interactive environment that replicates real-world or imagined scenarios for training and research purposes.
.jpg)
Portable Flue Gas Analyzer
Flue gas analyzers are used to measure and monitor the composition of gases emitted from combustion sources like boilers, furnaces, and engines, ensuring efficient combustion and compliance with environmental regulations
Marshal stability testing machine (Digital)
The Digital Marshal Stability Testing Machine, as per ASTM D6927 and ASTM D1559, is designed to evaluate the stability and flow properties of bituminous paving mixtures.
.jpg)
Asphalt Testing Machine (ATM)
Asphalt testing machine is an advanced equipment designed to evaluate the mechanical properties and performance of asphalt mixtures.
ATM With Resilent Modulus Testing jig assembly
As per ASTM D4123.To assess the stiffness of asphalt mixtures under cyclic load.
ATM with Indirect Tensile Fatigue Testing jig assembly
As per BS EN 12697-24. ITFT characterizes the fatigue behavior of the asphalt mixture under repeated loading.
ATM with Dynamic Creep Testing jig assembly
As per BS EN 12697-25, A Dynamic creep is to determine the resistance of the asphalt mixture to permanent deformation.
Universal Multispeed load Frame 50 KN
The digital touch-screen, computerized universal multispeed tester, is the ideal to perform ,CBR, Unconfined compression, Quick Triaxial,Marshal Stbility,Indirect tensile Stregth test.
.jpg)
Rotary Evaporator
The device is used for the efficient and gentle removal of solvents from samples by evaporation. It composed of distillation flask 1000 ml capacity, motor of variable speed, (suitable to rotate the flask at an adjustable rate of 10 to 280 rpm), solvent recovery flask, 1000 ml capacity; condenser, heated oil bath..
.jpg)
Rolling Thin Film Oven
The Rolling Thin-Film Oven (RTFO) provides simulated short term aged asphalt binder for physical property testing.
Bitumen Extarctor
Used for the determination of bitumen percentage in bituminous mixtures.